Self-defined innovation sets a new paradigm for battery safety: Aurora Battery highlights BAIC MOTOR (01958) delivering a new "answer" for family-oriented all-terrain driving.
As the industry's safety threshold rises, the differentiated answer from automakers may well be found in BAIC's practice: building on a deep understanding of user scenarios and long-term in-house R&D accumulation, it pushes safety to the extreme through self-defined standards.
The penetration rate of new energy passenger vehicles is approaching 70%. Data from the China Passenger Car Association shows that in October 2026, the domestic retail penetration rate of new energy vehicles reached 67.5%. But the higher the penetration rate, the more the long-standing problem of battery safety needs a systematic response. This not only affects individual users' car-purchasing decisions, but also relates to the long-term sustainable development of the entire new energy vehicle industry.
A series of positive changes are accelerating. At the policy level, starting July 1, 2026, the mandatory national standard "Safety Requirements for Traction Batteries for Electric Vehicles" (GB 38031-2025) was officially implemented. The requirements for thermal diffusion testing were upgraded from "no fire or explosion within 5 minutes after thermal runaway, and providing thermal event alarms" to no fire or explosion, and smoke must not harm occupants. This means that safety has become a "mandatory question" for all newly declared vehicle models.
After the threshold was raised, a deeper question also surfaced: when safety standards rise further, how should automakers involved in this respond? Even if they all pass the national standard, a standardized solution and a solution defined in a targeted way according to user scenarios may have completely different levels of redundancy in the face of real risks. And the difference may not lie in the general parameters of the battery cells, but in the right to define.
In the past, automakers purchased standardized full-pack solutions from battery manufacturers. The battery was roughly a "black box," and automakers did not control the intermediate material formulations, manufacturing processes, and safety logic. Standardized solutions can certainly meet general safety requirements, but it is difficult to carry out targeted design for specific risk scenarios. Automakers, however, face users directly and have a natural advantage in understanding vehicle-use scenarios and improving safety redundancy. The Aurora Battery equipped in the BAIC XINGTAN 5X is a systematic achievement demonstration by BAIC MOTOR (01958) at the current watershed in the development of new energy vehicles, based on BAIC's 17 years of accumulated battery self-development.
From standard solutions to independent definition, digging deep into the safety logic of Aurora Battery
The BAIC XINGTAN 5X, launched on November 12, not only achieved delivery upon launch, but also created a dedicated battery solution tailored for users in family all-terrain scenarios in terms of battery technology. In daily vehicle-use scenarios, off-roading can be regarded as one of the categories that most tests battery safety. Urban users generally worry about "whether the battery will spontaneously combust," while off-road users ask a few more questions: Will the battery pack deform after underbody impact? Is insulation still normal after wading? After parking overnight at minus 20 degrees Celsius, will it still start normally the next day? When climbing slopes in high temperatures, will power suddenly be reduced?
This string of questions points to the same fact: general safety standards cannot cover them one by one, because standardized battery packs satisfy "safety under average operating conditions," but safety needs in off-road scenarios are non-uniform and non-standard. Whether a battery pack that has passed national standard testing in the laboratory has sufficient safety redundancy in extreme outdoor environments is a question that must be raised.
In this case, relying solely on a standardized solution is clearly not enough. Structural protection, thermal management strategies, and BMS monitoring logicthese system-level designs all need to be re-derived around specific user scenarios. And this precisely requires the party that best understands the scenarios to lead the definitionAurora Battery is exactly the result of BAIC translating this scenario understanding into the product. It is independently defined and led by BAIC in design and development and quality control, and its safety logic is derived from real vehicle-use scenarios one by one.
At the passive safety level, the 8-layer protection structure of the Aurora battery pack sets up defenses level by level from bottom to top. When driving on bad roads and over gravel, the resin protective material at the very bottom blocks gravel, and a high-strength steel underbody shield resists underbody impact; in a collision, buffering foam absorbs energy, the cooling plate controls temperature, and the "keel" frame resists pressure; in the event of thermal runaway, a ceramic composite strip at the top of the cells blocks thermal propagation; when wading, the box cover seals against water, and the IP68 waterproof rating can achieve no water ingress after immersion in 1.5 meters of water for 2 hours.
An even more prominent point is that the battery pack is positioned higher than the subframe, so during underbody scraping, the subframe bears the first impact. Under official test conditions, the extended-range battery pack can withstand 100kN (equivalent to 10 tons of weight) frontal and side extrusion of the battery's weakest area without the cells catching fire or exploding, without insulation failure of the entire pack, and it also meets the requirement that after a frontal collision at a relative speed of 50 km/h between two vehicles, there is no fire or explosion and no coolant leakage.
At the active safety level, traditional BMS mainly monitors voltage, temperature, and current thresholds, functioning more like after-the-fact alarms; under national standard requirements, monitoring lasts for 1 hour after power-off, and after the vehicle sleeps, the battery is essentially unattended. Aurora Battery brings BMS monitoring to 24-hour full-time protection, with single-point fault diagnosis coverage SPFM 99% and latent fault coverage LFM 90%in plain terms, even if a certain sensor fails, or a fault is still in the latent period and has not yet appeared, the system can identify it.
On this basis, BAIC's first mass-produced AI battery warning model, based on the Transformer network, covers six major failure modes including abnormal self-discharge, sudden thermal runaway, connection abnormalities, insulation failure, and capacity degradation, achieving warnings 7 days in advance with accuracy 95%. From "knowing only after something happens" to intervention in advance, this is precisely thanks to BAIC's independent definition of the entire logical architecture from BMS monitoring strategies to cloud-based AI warnings.
Low-temperature and charge-discharge capabilities are also another point where BAIC's independent definition lands. Aurora Battery's wide-temperature-range material system and intelligent thermal management achieve startup in extreme cold at minus 35 degrees Celsius, introduction of engine waste heat into the battery within 8 minutes at minus 20 degrees Celsius, and no power attenuation at a high temperature of 50 degrees Celsius. More notably, Aurora Battery optimized the material pairing and coating methods of the positive and negative electrodes together, making charging and discharging faster and smoother without reducing battery capacity, and without sacrificing safety margins.
A concentrated test of results after 17 years of accumulation: how to understand the "evolution" of BAIC MOTOR (01958)?
Automakers independently defining batteries certainly has the opportunity to push safety redundancy to a higher level, but implementation is a multidisciplinary engineering challenge. Cell electrochemistry lays the foundation for underlying performance, thermal management needs to stabilize the operating range within huge temperature differences, the BMS must complete state judgment and fault isolation at millisecond level, and structural safety must also cover various unconventional impacts. More troublesome is that the subsystems do not exist in isolation: the battery pack is deeply coupled with the vehicle chassis, and BMS strategies are strongly bound to thermal management, making it almost very difficult to develop a universal solution applicable everywhere independent of a specific vehicle model. This may also be the reason why many automakers, despite having the intention to make arrangements, find it difficult to complete the full system definition.
But BAIC's accumulation on this question is much longer than most people impressionistically assume. As early as 2009, BAIC launched power battery research and development, and has since gone through 5 technological iterations. GMTEight noted that several "first to eat the crab" moves in the industry all had BAIC behind them: taking the lead in scaling the implementation of battery swap technology, jointly launching and mass-producing the world's first CTP module-less battery pack, and independently developing permanent thermal blocking technology.
In addition, BAIC is also one of the core participating units in the first batch of mandatory national standards for electric vehicles, and has deeply participated in the drafting of more than 80 national, industry, and group standards, and is one of the main formulators of the new national standard for battery safety.
Of course, qualification does not equal results. Whether the definition is correct still depends on market verification.
Here, one cannot fail to mention the origin of Aurora Battery. Before "getting on board" the BAIC XINGTAN 5X, Aurora Battery had already been applied at scale on multiple new energy vehicle models under BAIC. Moving the timeline further back, in order to verify whether this system definition is sufficiently safe, BAIC invested RMB2 billion to build its own battery testing laboratory, setting up 121 major items and more than 150 minor items of testing. Only after Aurora Battery passed all items did delivery begin. It even achieved the high standard of "meeting the new national standard one year in advance, with multiple indicators exceeding the new national standard by up to 96 times."
Looking back at the question at the beginning, after the industry's safety threshold is raised, the differentiated answer of automakers may be hidden in BAIC's practice: based on deep understanding of user scenarios and long-term self-development accumulation, pushing safety to the extreme through independent definition. In GMTEight's view, behind the launch of the BAIC XINGTAN 5X, from purchasing standard solutions externally to independently defining batteries, what BAIC MOTOR (01958) has completed is a leap from "meeting standards" to "fitting scenarios," and the confidence supporting this leap is precisely its accumulation and sedimentation in independent technology development.
Related Articles

HK Stock Market Move | CHINA RES MIXC (01209) Falls Nearly 6% Again as Same-Store Sales Growth at Mainland Malls Slows in October; Morgan Stanley Expects Sluggishness to Persist Through Q1 Next Year

BofA Securities: Maintains "Buy" Rating on BYD COMPANY (01211); Management Remains Optimistic About Domestic Market Outlook
.png)
HK Stock Market Move | |JW THERAP-B (02126) Rebounds Over 8%; Company Clarifies Cost Dispute, Expects Unit Production Cost of Benlysta to Drop Over 65% Starting Next Year
HK Stock Market Move | CHINA RES MIXC (01209) Falls Nearly 6% Again as Same-Store Sales Growth at Mainland Malls Slows in October; Morgan Stanley Expects Sluggishness to Persist Through Q1 Next Year

BofA Securities: Maintains "Buy" Rating on BYD COMPANY (01211); Management Remains Optimistic About Domestic Market Outlook

HK Stock Market Move | |JW THERAP-B (02126) Rebounds Over 8%; Company Clarifies Cost Dispute, Expects Unit Production Cost of Benlysta to Drop Over 65% Starting Next Year
.png)





