Guosen: Localization trend of gas turbine superalloys; localization advancing toward component validation and volume supply
In the future, the focus of domestic substitution will be on the independent design of high-performance alloys, the manufacturing of large-sized complex hollow blades, yield improvement, and long-term service validation.
Guosen released a research report stating that it estimates cumulative global gas turbine superalloy manufacturing input volume of approximately 666,000 tonnes for 2026-2030, with a compound annual growth rate of about 8.7%. Aero-engine demand is growing in tandem, further driving up superalloy demand. Master alloy purity control, precision casting of large-size complex hollow blades, manufacturing yield, and long-term service validation constitute important technical barriers. Future domestic substitution priorities lie in independent design of high-performance alloys, manufacturing of large-size complex hollow blades, yield improvement, and long-term service validation.
Guosen's main viewpoints are as follows:
Global gas turbine demand is growing rapidly, and the resonance of aero-engine and gas turbine demand is driving up superalloy demand
According to EPRI (Electric Power Research Institute), global gas turbine orders reached 100.3 GW in 2025, up 72.3% year on year. Growing electricity demand from AI data centers, combined with grid connection constraints in some regions, is driving demand for on-site gas turbine power supply. BloombergNEF expects global annual gas turbine manufacturing capacity to increase from 67 GW in 2025 to 102 GW in 2030. Under a scenario of full capacity release, the bank estimates cumulative global gas turbine superalloy manufacturing input volume of approximately 666,000 tonnes for 2026-2030, with a compound annual growth rate of about 8.7%. Aero-engine demand is growing in tandem, further driving up superalloy demand.
Superalloys are core materials for gas turbine hot-end components, and large-size precision casting constitutes an important manufacturing barrier
Gas turbine hot-end components endure high temperatures, mechanical loads, and hot corrosion over long periods, placing high demands on materials' high-temperature strength, microstructural stability, and hot corrosion resistance. Superalloy composition design is evolving toward coordinated optimization of high performance, long life, and cost-effectiveness, and advanced heavy-duty gas turbines are gradually expanding the application of directionally solidified columnar crystal and single-crystal blades. Master alloy purity control, precision casting of large-size complex hollow blades, manufacturing yield, and long-term service validation constitute important technical barriers.
The domestic superalloy material system is gradually improving, and domestic substitution is advancing from material development to component validation and volume supply
China has established equiaxed crystal, directionally solidified columnar crystal, and single-crystal cast superalloy systems. Some independently developed equiaxed crystal alloys have achieved commercial application in heavy-duty gas turbines, some directionally solidified columnar crystal blades have achieved volume delivery, and large-size single-crystal blades continue to advance through trial production, customer certification, and engineering application. Future domestic substitution priorities lie in independent design of high-performance alloys, manufacturing of large-size complex hollow blades, yield improvement, and long-term service validation.
Domestic substitution and overseas supply chain expansion proceed in parallel, bringing development opportunities for materials, precision casting, and forging companies
On the materials side, Jiangsu Longda Superalloy and Western Superconducting Technologies have entered overseas gas turbine supply chains, with some products achieving supply; on the precision casting side, Anhui Yingliu Electromechanical's domestically produced large F-class directional hollow blades have achieved volume delivery, Baker Hughes blades of multiple models have achieved mass production, and Wedge Industrial has obtained overseas gas turbine blade orders across multiple power classes; on the forging side, Guizhou Aviation Technical Development has completed technical upgrading and capacity expansion for gas turbine production, and Daye Special Steel under CITIC Pacific Special Steel Group has achieved volume supply of heavy-duty gas turbine superalloy tie-rod forgings. Going forward, focus should be on the release of new capacity, customer certification, and the pace of order conversion.
Risk warnings:
Global gas turbine demand falls short of expectations; industrial chain capacity expansion falls short of expectations; domestic superalloy and hot-end component technology development, customer certification, and order conversion fall short of expectations; risks of intensified international trade frictions and changes in overseas market access policies.
Related Articles

HK Stock Market Move | |GOFINTECH QUANT (00290) rises over 3% after positive profit alert; expects interim profit to increase by up to 54.6% year-on-year

Guosen: From production transformation to experience innovation, a new growth cycle for the content industry begins

HK Stock Market Move | Copper stocks continue to fall. Expectations of an AI slowdown weigh on the copper demand outlook. Potential U.S. copper tariff policy distorts copper prices.
HK Stock Market Move | |GOFINTECH QUANT (00290) rises over 3% after positive profit alert; expects interim profit to increase by up to 54.6% year-on-year

Guosen: From production transformation to experience innovation, a new growth cycle for the content industry begins

HK Stock Market Move | Copper stocks continue to fall. Expectations of an AI slowdown weigh on the copper demand outlook. Potential U.S. copper tariff policy distorts copper prices.






