US IPO Analysis | Ningtai Mould (NTMJ.US): From a Small Factory in Jiangyan to Nasdaq, a Thirty-Year Mold Maker's US Listing Test
Ningtai Mould's performance is not encouraging.
Ningtai Mould, which counts LG Electronics (Taizhou LG Electronics Refrigeration) and TCL Home Appliances (Hefei) as its two well-known major customers, has embarked on a new journey toward a US listing.
It has been observed that after confidentially filing with the SEC on November 12, 2025, Ningtai Mould submitted a public version of its prospectus (Form F-1) to the SEC on May 26 of this year, applying to list on Nasdaq under the ticker "NTMJ."
According to the prospectus, Ningtai Mould's IPO plans to offer 6.25 million Class A ordinary shares at a price range of US$4 to US$5 per share. Even calculated at the lower limit of US$4, the total fundraising would reach US$25 million, exactly touching Nasdaq's regulatory red line for Chinese issuers of a "minimum public offering amount of no less than US$25 million."
If priced at the upper limit of US$5, the fundraising amount could reach as high as US$31.25 million. This offering structure indicates that Ningtai Mould intends to anchor its pricing above the compliance floor, both ensuring listing eligibility and leaving room for subsequent valuation negotiations.
However, Ningtai Mould's financial performance is not encouraging. In 2025, the company's revenue was US$18.6762 million, up 20.11% year-on-year, but net profit for the period was approximately US$1.6675 million, down 4.46% year-on-year. Clearly, this is a report card of "revenue growth without profit growth."
Industry coverage continues to expand, with 62 customers in 2025
As a veteran in the industry, Ningtai Mould has been deeply engaged in the mould and injection-molded products sector for nearly 30 years.
Going back to 1996, company founder Wang Changxuan started out in Jiangyan, Taizhou, focusing on the development and manufacturing of high-precision moulds and injection-molded products. With six years of "hustling" in Taizhou's mould and home appliance supporting circles before founding the company, Wang Changxuan led the company to quickly gain a foothold in the industry.
Around 2004, Ningtai Mould's customer expansion entered the "fast lane," as the company began business contact with Chunlan Air Conditioning, LG, Yueda Kia and others, laying a solid foundation for subsequent in-depth cooperation.
As customer demand accelerated, Ningtai Mould moved into a new factory in Jiangyan in 2014, achieving simultaneous leaps in production capacity and delivery capability.
Once the capacity bottleneck was cleared, the company's confidence in taking on large orders increased significantly. In 2015, Ningtai Mould formally entered TCL Hefei Home Appliances' supply chain, marking a major expansion of its customer map.
The company subsequently continued to improve its quality system, passing ISO9001 basic quality management system certification and IATF16949 automotive-grade system certification in 2016. This meant Ningtai Mould obtained an "entry ticket" to the automotive supply chain, expanding its business boundary from the home appliance mould system into the automotive sector.
Around 2017, Ningtai Mould obtained import-export qualifications and began receiving overseas trial orders from South Korea and India, officially launching the company's "going global" path.
Since then, Ningtai Mould's development has entered a steady period, with production capacity for its two core businessesmoulds and injection-molded partscontinuing to be released and scale steadily climbing. Its industry coverage also expanded to consumer electronics, home appliances, automotive (interior/exterior trim and structural parts), die-casting supporting components and other fields. By 2025, the company's total number of active customers had increased to 62.
It was also in that year that Ningtai Mould set up a red-chip structure, sounding the "horn" for its US IPO sprint. From Jiangyan to Nasdaq, the growth story of this Taizhou mould factory has finally reached a critical juncture where it must withstand the test of the capital markets.
Revenue from custom injection moulds surged 68.5%, becoming the main driver of total revenue growth
A deeper analysis of Ningtai Mould's 2025 performance of "revenue growth without profit growth" reveals a true operating portrait typical of traditional manufacturing enterprises under "project-based volatility + major customer dependence."
According to the prospectus, Ningtai Mould's total revenue grew 20.1% to US$18.6762 million in 2025, mainly driven by a 68.5% surge in revenue from custom injection moulds.
During the reporting period, due to increased demand from its largest customer LG Electronics (Taizhou LG Electronics Refrigeration), sales volume of custom injection moulds increased 13.7%, and combined with an increase in the value per mould set, the average unit price rose 48.2%.
After achieving "both volume and price increases," custom injection moulds' share of the company's total revenue rose from 29.86% to 41.88% in 2025, becoming the main engine driving the company's revenue growth.
Meanwhile, revenue from the injection-molded parts business during the reporting period was US$10.4482 million, down slightly 0.9% year-on-year, with its share of total revenue falling from 67.20% to 55.94%, showing an overall stable trend.
However, due to the increased revenue share of the low-gross-margin custom injection mould business and the expansion of production staff to handle the volume ramp-up of projects such as LG Taizhou, Ningtai Mould's overall gross margin during the reporting period fell from 20.97% to 17.54%, a decline of more than 3 percentage points, indicating a decline in profitability.
On this basis, the increase in selling expenses driving up operating expenses further suppressed the company's profit release space. During the reporting period, due to increased orders, transportation expenses rose significantly, causing the company's selling expenses to grow 50.5%, which in turn drove total operating expenses up 16.5% to approximately US$1.8 million.
It can thus be seen that Ningtai Mould's 2025 revenue growth was mainly driven by demand growth from a single major customer, while changes in revenue structure and growth in selling expenses jointly affected the company's profit side.
But this is not the full picture. Deconstructing the business model from the bottom up, Ningtai Mould's operational resilience may face scrutiny. Custom injection moulds are a typical project-based business with long delivery cycles, where revenue is recognized in a lump sum at the acceptance node, naturally presenting "pulse-like" rather than "linear" growth. Once projects are settled intensively at a certain stage while new projects fail to keep up in time, growth in this business may come to an abrupt halt.
The injection-molded parts business, by contrast, involves standardized products with stable shipment rhythms and relatively higher gross margins, making it a more reliable profit foundation than the custom injection mould business. Although revenue from this business declined only slightly in 2025, if it cannot regain growth going forward, the company's base may face a risk of continued bleeding.
In addition, high dependence on a single customer will also be a potential risk to Ningtai Mould's stable operations. According to the prospectus, although Ningtai Mould had 62 active customers in 2025, revenue from its largest customer "Taizhou LG Electronics Refrigeration" accounted for as much as 67.8%, approaching 70% and up more than 7 percentage points from 60.3% in 2024. Clearly, reducing customer concentration has become a pain point Ningtai Mould urgently needs to address.
Progress on four dimensions becomes key to the company's valuation
Beyond business operating challenges, Ningtai Mould also has leverage points for breaking through. From the industry perspective, China is already the world's largest mould producer, with industry output value steadily climbing from approximately RMB343.2 billion in 2023 to approximately RMB380 billion in 2025. The market is expected to further increase to RMB397.5 billion in 2026, up 4.6% year-on-year.
The massive market in the hundreds of billions of yuan range continues to grow steadily, indicating that incremental opportunities remain in the market, and the home appliance mould sector is one of them. According to Ningtai Mould's prospectus, the home appliance mould market was approximately RMB45 billion in 2025 and is expected to grow to approximately RMB65 billion by 2030, with a compound annual growth rate of approximately 7.5%.
The home appliance mould sector is Ningtai Mould's base, with its largest customer Taizhou LG Electronics Refrigeration backed by global home appliance giant LG, and the company having previously served TCL Home Appliances (Hefei) in depth. This demonstrates its deep accumulation in the home appliance sector and its potential to benefit from the industry's continued growth.
While deeply cultivating the home appliance sector, Ningtai Mould's highlight is its layout in other industries, with its products' downstream already covering consumer electronics, automotive manufacturing, pressure die-casting and other industries. If the company can continue to expand into other industries going forward, it may open up future growth space.
It is worth noting that the upgrading wave of the mould industry itself may also become a growth opportunity for Ningtai Mould. The industry is currently undergoing three major trends: first, the manufacturing side is evolving toward intelligence to reduce production costs; second, the product side is upgrading toward precision and high-end, with demand for complex structural parts and multi-material molding raising mould added value; third, going global is changing from an "option" to a "necessity," with demand for mould supporting facilities being released in manufacturing transfer destinations such as Southeast Asia and India.
If Ningtai Mould can seize the above trends, its growth logic may shift from "highly dependent on a single customer" to "a precision manufacturing platform aligned with industrial upgrading," and the fundraising plan in the prospectus provides a roadmap for this shift.
According to the prospectus, the net proceeds raised by Ningtai Mould will be mainly used for three aspects: production equipment upgrading and procurement, production facility expansion, and R&D investment. This indicates that the company has begun to increase investment on the manufacturing side in high-precision machining centers, CNC machine tools and other areas, and its R&D spending will be directed toward mould design and development, new material/new process testing, promoting the high-end upgrading of the company's products.
Overall, Ningtai Mould currently presents a stage of "revenue growth without profit growth" after an imbalance in business structure caused by over-reliance on a single customer. Whether it can break this situation depends on the company's progress in fulfilling four dimensions: industry diversification expansion, manufacturing-side intelligent upgrading, product-side high-end elevation, and going-global effectiveness. This will not only determine the company's performance in the coming years but also its valuation level after listing. The market is watching to see how far Ningtai Mould can go.
Related Articles

HK Stock Market Move | BEKE-W (02423) Surges Over 10% After Earnings; Q3 Revenue and Profit Both Beat Expectations; Revitalizing Existing Housing Stock Becomes a New Growth Engine

HK Stock Market Move | MOMENTA-W (06880) rises over 7%, plans to repurchase up to HK$2 billion of Class A ordinary shares; the company will strengthen advanced intelligent driving R&D with SAIC

HK Stock Market Move | AI hardware stocks mostly under pressure: Guangdong Dtech Technology (01377) fell over 11%, Zhongji Innolight (03308) fell over 6%.
HK Stock Market Move | BEKE-W (02423) Surges Over 10% After Earnings; Q3 Revenue and Profit Both Beat Expectations; Revitalizing Existing Housing Stock Becomes a New Growth Engine

HK Stock Market Move | MOMENTA-W (06880) rises over 7%, plans to repurchase up to HK$2 billion of Class A ordinary shares; the company will strengthen advanced intelligent driving R&D with SAIC

HK Stock Market Move | AI hardware stocks mostly under pressure: Guangdong Dtech Technology (01377) fell over 11%, Zhongji Innolight (03308) fell over 6%.






