Fuling Technology (001356.SZ) subsidiary involved in a fire accident, with preliminary estimated losses of approximately 3.5 million yuan.

Fuling Technology (001356.SZ) issued an announcement that on the evening of September 17, 2026, a fire accident occurred in the pulp molding workshop of PT FOOD PACKAGING JAYA (hereinafter referred to as "Winsheng Packaging"), a wholly-owned subsidiary of the company. After the accident, the company immediately activated its emergency response plan, set up an on-site emergency team, and fully cooperated with the local fire department in firefighting and rescue efforts. The fire has been extinguished. According to a preliminary investigation, the cause of the accident was initially determined to be improper operation by third-party workers during electric welding operations, and the specific cause remains to be further verified. This accident caused no casualties and did not affect other production workshops of Winsheng Packaging (the plastic tableware workshop). The accident caused varying degrees of damage to some on-site factory buildings, equipment, and a small amount of inventory. The specific loss amount is currently being verified and assessed, with a preliminary estimated loss of approximately RMB 3.5 million, subject to the final verification and assessment results. This fire accident is expected to have a certain impact on the company's operating performance for 2026, and the company will take all necessary measures to minimize the losses. At the same time, due to this accident, the production progress of pulp molding products will be affected to a certain extent. It is preliminarily estimated that the pulp molding workshop will suspend production for about 2 months. The company has established a working group to properly handle production and operation scheduling and other matters, resume the production of pulp molding products as soon as possible, and make every effort to reduce or eliminate the impact on customer order delivery. At present, the sales volume and sales revenue of the company's pulp molding products are relatively low. From January to June 2026, the sales revenue of this product accounted for less than 1% of the company's operating revenue.